Table with fine thread screw

More information on Table with fine thread screw

Using of manual fine-pitch screw tables

Acting is done by a grip knob supplied with the table.

Maxi stroke is 100 mm for size 0, and 200 mm for sizes 1 and 2. Any non-standard intermediate stroke can be produced.

The locking in position is done on the metric screw, either in position B1 (above the front plate) or in position B2 (at the end of the end plate) depending on the access and the space available.

The position is visualized by a mechanical indicator or by ruler on the base plate.

The fixing on the frame is done by the 2 end plates (laminated holes) or by the end plate in “Z axis” version for vertical applications.

The positioning accuracy of manual fine pitch tables

The axial positioning accuracy of these tables is <0.20 mm (in practice 0.05 to 0.15 mm), because the axial play is largely eliminated after locking in position, it remain only the axial play of the screw-nut system since the play in the transmission bearing is removed.

Assembly of manual tables in 2 or 3 axes

Combination in manual XY table: for the creation of an XY cross table, the tables can be mounted one on top of the other using the base plate of the upper table.

Combination in manual YZ table: the vertical table in “Z Axis” version is mounted on the body of the horizontal table, directly or with additional threads on body.

Other possibilities with the range of manual tables

These same tables, 100% interchangeable, are available in trapezoidal screw: the pitch is therefore greater, this is the type 309B/C .

The range of manual tables AVM Automation is extended, you can see the whole of this range of manual tables on the home page of this range.

“Custom-made” tables are possible for quantities> 10 pieces (please consult us for feasibility).