Manual fine-pitch screw table
For adjustments requiring a slower feed than a trapezoidal screw, check out our fine pitch metric screw tables (pitch 1 and 1.25 mm).
100% interchangeable with the economical Type 309B tables, these tables offer a wider range of adjustment and advance.
Using of manual fine-pitch screw tables
Acting is done by a grip knob supplied with the table.
Maxi stroke is 100 mm for size 0, and 200 mm for sizes 1 and 2. Any non-standard intermediate stroke can be produced.
The locking in position is done on the metric screw, either in position B1 (above the front plate) or in position B2 (at the end of the end plate) depending on the access and the space available.
The position is visualized by a mechanical indicator or by ruler on the base plate.
The fixing on the frame is done by the 2 end plates (laminated holes) or by the end plate in “Z axis” version for vertical applications.
The positioning accuracy of manual fine pitch tables
The axial positioning accuracy of these tables is <0.20 mm (in practice 0.05 to 0.15 mm), because the axial play is largely eliminated after locking in position, it remain only the axial play of the screw-nut system since the play in the transmission bearing is removed.
Assembly of manual tables in 2 or 3 axes
Combination in manual XY table: for the creation of an XY cross table, the tables can be mounted one on top of the other using the base plate of the upper table.
Combination in manual YZ table: the vertical table in “Z Axis” version is mounted on the body of the horizontal table, directly or with additional threads on body.
Access to the product sheet of manual fine-pitch tables or directly to the catalog:
