Bevel gearbox on manual tables

This option is suitable for manual leadscrew table Type 309* in size 3 and size 4 (models 309 L/M/N/P/R/S)

It allows the handwheel to be oriented at 90° in relation to the axis of the table to facilitate access if it’s restricted.

To allow mounting of the bevel gearbox on tables 309*3 and 309*4, the tables must be with a 7 mm hexagonal shaft output (with the suffix /SAX7 after the order no.).

=> Access to bevel gearbox product page

Bevel gearbox orientable on 4 sides

Different possibilities are offered to meet different uses :

– Orientation towards the front side or the lateral side

– With removable or irremovable handwheel (or grip knob)

– With (or without) positioning indicator, rotatable at 0°, 90° or 180° and 2 viewing directions

Bevel gearbox to connect 2 parallel tables

It’s also possible to use the transmission alone (without operating element) to connect 2 tables with a hexagonal bar.
=> ref : /RA7000 (see picture below)

Version and orientation examples :