Bevel gearbox at 90° on Type 309 manual tables
Gear ratio 1:1
Orientation on front side or lateral side
With or without handwheel, knob, indicator
|On front side||yes||yes||yes||no|
|On lateral side||yes||yes||no||yes|
|Indicator||no||no||in option||in option|
More information on Bevel gearbox
Adaptation on tables with hexagonal shaft output
This option is suitable for manual leadscrew table Type 309* in size 3 and size 4 (models 309 L/M/N/P/R/S).
It allows the handwheel to be oriented at 90° in relation to the axis of the table to facilitate access if it’s restricted.
Gear ratio: 1:1
Max. driving torque: 4 Nm
To allow mounting of the bevel gearbox on tables 309*3 and 309*4, the tables must be with a 7 mm hexagonal shaft output (with the suffix /SAX7 after the order no.).
Bevel gearbox orientable on 4 sides
Different possibilities are offered to meet different uses :
– Orientation towards the front side or the lateral side
– With removable or irremovable handwheel (or grip knob)
– With (or without) positioning indicator, rotatable at 0°, 90° or 180° and 2 viewing directions
Bevel gearbox to connect 2 parallel tables
It’s also possible to use the transmission alone (without operating element) to connect 2 tables with a hexagonal bar.
=> ref : /RA7000
Composition of the complete order no. for a table with gearbox
For a leadscrew table size 4 stroke 400 mm on bronze bearings and a bevel gearbox on front side with hanwheel and standard indicator:
Version and orientation examples :
RA7000, RA7110, RA7120, RA7130, RA7150, RA7210, RA7220, RA7230, RA7211, RA7221, RA7231, RA7212, RA7222, RA7232, RA7410, RA7420, RA7430, RA7411, RA7421, RA7431, RA7412, RA7422, RA7432