Lifter with leadscrew and ballscrew

More information on Lifter with leadscrew and ballscrew

Motor adaptation for lifting table

These lifting tables are delivered without motor, but the adaptation of your motor can be done by us.
Some adaptations are standard, especially for standard motors (NEMA17 or NEMA23), if the dimensions of your motor are not listed, contact us to check the feasibility of your motor adaptation from our rough parts.

Presentation of the lifting tables to be motorized

The trapezoidal screw version is irreversible and the axial precision is <0.15 mm (in practice 0,02 to 0,10 mm).
The ballscrew version is reversible and the axial accuracy is <0.07 mm.

The maxi stroke is 300 mm, and any intermediate stroke can be produced.

Assembly of tables in XZ, YZ or XYZ systems

For a crossed table XZ, the tables are mounted on one another directly by the body with the option 308922* (smooth holes are made in the body of a table).
For YZ or XYZ table, the end plate of the lifting table is fixed on the body or on the base plate of a horizontal table Type 308.

Generally fixed by the end plate in vertical application, it’s also possible to fix them by the body to use them horizontally with the load to move fixed on the sturdy end plate.