H Guide – Classic series

More information on H Guide – Classic series

H guide unit according ISO standard

This Classic series of linear guide unit is the most common on the market.
It ensure the guiding and anti-rotation of the payload, the floating coupling protects the rod of the cylinder from any mechanical stress.
Adapted to the ISO6432 (Ø12 to 25) and ISO15552 (Ø32 to 100) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators.

Guide unit on plain bearing or ball bearing

The plain bearings version is recommended for static radial loads, short strokes, dusty environments, it’s the more economical version.
The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and off-centering loads.

For critical applications, we propose Strengthened and Heavy series and for simple anti-rotations, you can opt for U-series, Classic or Light.

Anti-corrosion guide unit

For environments requiring an anti-corrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and  front plate are remaining in anodized aluminum (suffix /AC after the reference).

For all stainless steel guides, refer to the 34*X series.

Scrapers in polyurethane can be proposed for dusty or dirty environments.

Protection kit and back stop kit on guide unit

The protection kit (tube wrapping the rods at the rear of the guide), for example allows to avoid a guarding housing on a semi-automatic machine (label maker …).

The back stop kit, with hydraulic shock absorber, allows to adjust the output stroke while stiffening the entire guidance by closing the parallelogram composed by the plates and the rods.

Stroke limitation of the guide units

Any special stroke may be produced, within the limit of the following strokes:
. guide with rods Ø10 : 600 mm max.
. guide with rods Ø12 : 800 mm max.
. guide with rods Ø16 : 1000 mm max.
. guide with rods Ø20 and 25 : 1200 mm max.