Ball bearings guide
Table for pneumatic cylinders ISO Ø16 to Ø40
Guided on ball bushings
Protected by wipers seals
Options :
Hydraulic shock absorber
Elastic absorber
| Model | 3071 | 3072 | 3073 | 3074 | |
| Cylinder Ø | (mm) | Ø 16 | Ø 25 | Ø 32 | Ø 40 |
| Guide rods Ø | (mm) | Ø 12 | Ø 16 | Ø 20 | Ø 25 |
| Cylinder standard | ISO 6432 | ISO 15552 | |||
| Maxi carried payload | (kg) | 0,5 / 7 | 2 / 15 | 4 / 30 | 8 / 60 |
Catalog
Notice
Spare parts
2D DXF
3D STEP
More information on Ball bearings guide
More rigid than a H guide unit
These tables maintaining the same quality of guidance and rigidity throughout the stroke. For a off-centered payload in vertical, these tables allow to be more rigid than a guide unit in H.
Hydraulic shock absorber on this table
A hydraulic shock absorber may be placed in opposition to the pneumatic cylinder to dampen, for example, the descent and/or limit the stroke at the output of the cylinder rod. The retracting stroke can be adjusted by the floating rod coupling.
Pneumatic cylinder not supplied.
Use in harsh environment
For dusty environments, additional nitrile or polyurethane scrapers can be added in front of the ball bushings.
An anti-corrosion version can be proposed with the rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum).
It’s possible to make these tables with plain bearings (bronze or polymer) on request.
3071120, 3071220, 3071320, 3071420, 3071520, 3071620, 3071720, 3071820, 3071920, 3072120, 3072220, 3072320, 3072420, 3072520, 3072620, 3072720, 3072820, 3072920, 3073120, 3073220, 3073320, 3073420, 3073520, 3073620, 3073720, 3073820, 3073920, 3074120, 3074220, 3074320, 3074420, 3074520, 3074620, 3074720, 3074820, 3074920, 5160010, 5160014
