Cross slide XY
Manual XY positioning stage realized with leadscrew table 309L
4 sizes : guide rods Ø12, 16, 20 or 25
Plain or ball bushings
Options :
Handwheel or grip knob
Position clamping
Positioning indicator
Base plate
| Model | 309L1 | 309L2 | 309L3 | 309L4 | |
| Screw Ø x load | (mm) | Ø10 x 2 | Ø12 x 3 | Ø16 x 4 | Ø16 x 4 |
| Guide rods Ø | (mm) | Ø12 | Ø16 | Ø20 | Ø25 |
| Strokes per axis | (mm) | 100 – 200 – 300 | |||
| Maxi carried payload | (kg) | 4 | 8 | 17 | 35 |
More information on Cross slide XY
Manual XY positioning stage
Tables 309L are assembled carriage on carriage (long carriage version only) with the option 308922 * making smooth holes in the carriage of a table.
The standard strokes for each axis are 100, 200 or 300 mm.
The same options as the 309L tables are available (handwheel, knob, indicator, locking, base plate).
The choice of the type of guide is also the same (bronze or ball bushings).
The axial positioning accuracy of these tables is <0.15 mm (in practice 0.02 to 0.10 mm).
Positioning tables with base plate
Base plates are only available for standard strokes (100, 200 and 300mm).
The lower plate allows the table to be fixed by the 4 holes in the central zone, while without a base plate, the table must be fixed by the end plates.
The upper plate can serve as a support for what is to be moved. It’s possible to add holes or threads according to your drawing to facilitate your installation.
