Manual lifting table
Driving by leadscrew
Guided by 2 rods
Handwheel or grip knob
Assembly in XY or XYZ table
|Screw Ø x lead||(mm)||Ø10 x 2||Ø12 x 3||Ø16 x 4||Ø16 x 4|
|Guide rods Ø||(mm)||Ø12||Ø16||Ø20||Ø25|
|Strokes||(mm)||0 – 300|
|Maxi carried payload||(kg)||3||7||12||20|
More information on Lifting table
Interest of lifting table
These tables can be fixed by only one end thanks to a reinforced sole, for vertical or offset applications (using the mobile body). This simplifies installation: directly on a plate or directly on the body of another table: no need to build a vertical structure to fix it.
In the fixed body version, they also make it possible to fix a load at the end (on the end flange): the quality of the embedding of the guide rods in this flange guarantees reliability even in the event of a bulky load (example: label printer).
Indeed, the assembly presented on the photo below corresponds to the height and width adjustment application of a label printer on a conveyor. The printer is attached to the end of the horizontal table and the base of the vertical table is attached to the side of the conveyor.
For XY crossed tables, the tables are mounted one on the other directly by the body (long body version only) with the option 308922 * making smooth holes in the body of a table.
Precision and robustness of this range of manual table
The guidance is provided by 2 rods on 4 calibrated bronze bearings (reduced play) or 4 ball bushings for guidance without clearance. The guide length of long body tables (309N/P) allows to accept large loads and torques.
The axial positioning accuracy of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). But the blocking in position is done on the carriage, by pressure on a guide rod, so as to remove the axial play of the nut of the trapezoidal screw after blocking.
Handwheel, indicator and maxi stroke of lifting tables
The shaft outlet is threaded to directly screw the handwheel or the grip knob with or without position indicator.
Consider the reverse display of the indicators when the table is mounted vertically.
The maxi stroke is 300 mm, and any intermediate stroke can be produced.
Other manual tables
This range can also be supplemented by classical tables depending on the assembly to be carried out, they are also available in an economical version for basic applications.
The whole range of manual tables is presented on the home page of this family.
“Custom-made” tables are possible for quantities> 10 pieces (consult us for feasibility).
309E1, 309E2, 309N1, 309N2, 309N3, 309N4, 309H1, 309H2, 309P1, 309P2, 309P3, 309P4, 309E1200, 309E1400, 309E1600, 309E2200, 309E2400, 309E2600, 309N1200, 309N1400, 309N1600, 309N2200, 309N2400, 309N2600, 309N3200, 309N3400, 309N3600, 309N4200, 309N4400, 309N4600, /BM06, /BM08, /BM10, /BP01, /BP02, /BP03, /BP04, /ID21R, /ID32R, /ID43R, /ID44R, /VD06, /VD08, /VD10, /VD15