Guide in stainless steel
Guide units for pneumatic cylinders ISO Ø20 to Ø50
For other cylinders (not standardized)
Complete guide units, or subsets (bearings, guide rods, rod couplings) to realize a guide adapted to your need and integrated to your machine
|Cylinder standard (other design possible)||ISO 6432||ISO 15552|
|Guide rods Ø||(mm)||Ø12||Ø12||Ø16||Ø20||Ø25|
|Strokes||(mm)||0 – 400|
More information on Guide in stainless steel
Materials used in stainless steel guides
These guide units are made of 304L stainless steel for environments requiring anti-corrosion and resistance to certain aggressive agents..
The scrapers are in thermo-polyurethane FDA approved.
Polymer bearings are in Iglidur J (dry using)
Bronze bearings are impregnated with oil (oil compatible with food processing areas)
The ball bushings can be with FDA grease (contact us)
Precautions for use in the food industry
Despite the materials used, these units cannot however be used in the direct food zone without precaution (in contact with or above food), since there is a retention zone at the level of the rod coupling and that particles or drops may ooze from the guide bearings. Additional protection may be necessary (deflector for example).
342X, 343X, 344X, 345X, 346X, 342X000, 342X100, 342X200, 343X000, 343X100, 343X200, 344X000, 344X100, 344X200, 345X000, 345X100, 345X200, 346X000, 346X100, 346X200, 5137410, 5137412, 5137510, 5137512, 5137610, 5137612, 5137710, 5137712, 5133011, 5133012, 5133013, 5133015, 5133016, 5133018, 5133019